Description描述

THYOSIL E1560 can be formulated into primers and gloss topcoats which are designed for commercial, institutional, and industrial maintenance markets.

The high gloss capability, corrosion resistance, hardness, and chemical resistance characteristics imparted by THYOSIL E1560 in a waterborne finish are typical of those associated with conventional solvent-based maintenance systems.

THYOSIL E1560 可以配制成光澤面漆和底漆，用于工業和商業的防腐防銹漆 。具有高光澤，耐腐蝕，耐化學腐蝕以及高硬度等性能。是終結傳統溶劑型防護漆的水性品。

Characteristics and advantages of use特性與優勢

· Excellent adhesion on metallic substrates.

· 在金屬表面具有超強的附著力

· Recommended to apply on metal surfaces without prior treatment.

· 推薦適用于未經處理的金屬表面

· Primer formulations exhibit stability with commonly used corrosion-inhibiting pigments.

· 底漆可以與常用防腐蝕顏料的配方呈現出良好的穩定穩定性

· Very good resistance to water and alcohol.

· 具有優良的防水和酒精性能

Coalescent and Co-solvent Effects 成膜助劑（聚結劑）和成膜溶劑的作用

The type and level of coalescent in the formulation is critical to the balance of properties. Hydrophobic coalescents that partition to the polymer phase are recommended as opposed to water-soluble coalescents.

成膜助劑（聚結劑）的類型和添加量的在配方中對性能的好壞是至關重要的。

常用疏水助劑為：Dowanol DPnB 二丙二醇丁醚，Texanol

常用親水助劑為： 二丙二醇甲醚 和丁基乙二醇

一般情況下天熱的地區添加量要少于天冷的地區。

Flash Rust Inhibitors 閃銹抑制劑

In waterborne paints for steel, the water phase must be inhibited or flash rusting will occur. The recommended additive is sodium nitrite, which is very effective at very low use levels.

水性涂料用于鋼鐵時，觸水時必須抑制或?qū)l(fā)生的閃銹。推薦的添加劑是亞硝酸鈉，在非常低的使用量，是非常有效的。

Defoamers消泡劑

Foam control is a major concern in waterborne paint formulation design. Additives are necessary to eliminate foam during manufacture and on application. The choice of defoamer type and level will depend primarily on the formulation and mode of application.

泡沫控制是水性涂料配方設計中的主要問題。添加劑在制造過程中，應用是必要的，以消除泡沫。消泡劑類型和級別的選擇將主要取決于配方和應用模式

Typical Properties 典型性質

These properties are typical, do not constitute specifications

High gloss white topcoat typical formulation高光面漆的典型配方

Step 1) White grinding 第一步： 白色色漿的研磨制備

*Ammonia solution of resin THYON PH725.

Step 2) High gloss white topcoat 第二步高光白色面漆

Chemical resistance 耐化學性能 

The table below shows the resistance properties of THYOSIL E1560 exposed to various household products. Rating 0 to 5, 5 is best.

下表展示了E1560對各種家用化學品的耐性，0到5級別，5是最好。

Testing procedure:測試步驟

Two coats of the tested lacquers were brushed over a metal sheet.在金屬表面涂2次 。

After one week curing at room temperature the household products were applied for one hour on the lacquers surface. 室溫下固化一周，在涂層表面涂上家用化學品一小時后測試。